三河マルシェ【MARCHE】三河エリアのコミュニティポータルサイト

Plywood hot press machine has become the main equipment of the actual production process, which must be used for hot press unit machineing and sticking planks after gluing and being created, different kinds of plywood possess different requirements for unit performance.

This machine can even be used for producing plywood, blockboard, fire wood veneer and melamine pieces of paper lamination on plywood, blockboard plus film faced plywood.

Plywood hot press machine machine is probably the main equipments in the production strategy of particleboard. It is kit that puts the sprayed slab blank in to the multi-lamination machine and heats and also presses it to press the slab into the blockboard..

The role plus working principle of hot press machine machine
A SINGLE, the role of warm press machine machine
??????The hot press machine machine would work for furniture manufacturers, fire wood door factories, and wood-based energy. It is one on the main machinery of woodworking systems. It is mainly employed for thermocompression bonding fixtures panels, building partitions, wooden doors, fire doors. Area material veneer. In distinct wood-based panels such seeing that: plywood, blockboard, MDF, particleboard, outside decoration various decorative resources, decorative fabrics, veneer, PVC, or anything else.,can also be utilised for drying, leveling, colour decorative wood chips Ripped, stereotyped, and the impact is remarkable.
2, the working principle of the hot press machine unit
??????Positive pressure is applied to the basis of adverse pressure, with special glue. For your processing of PVC series, the hot press device machine is incompatible while using negative pressure equipment due to its high pressure and low temperature. The short pressing occasion solves the deformation problem belonging to the negative pressure equipment if processing the workpiece (especially this large-area workpiece), and the deformation amount of the workpiece is drastically reduced.
It adopts superior electronic new product handle, and can be immediately completed by adjusting the actual processing steps of stepping into, upgrading, heating, vacuum, membrane layer pressure, stripping and lowering. Mainly powered by gas pressure and compressed air flow, so there must be sufficient air pressure along with gas volume. The frame consists of steel plate as an entire, and the overall shape is reasonable. The two worktables is usually recycled or used as a stand alone. The vacuum can be adjusted to the first low pressure, the high pressure suction coating, the membrane pressure can reach 0. 4MPa, along with the product can achieve the desired effect through adjustment.
JUST ONE. Safety points during processing. Suitable safety guards as well as vacuum and chip evacuation devices ought to be installed on the woodworking devices. All exposed pulleys, turntables or rotating shafts requires a reliable protective cover to forestall the sleeves from currently being caught.
2, when employing woodworking machinery, wear cuffs overalls, banned to wear gloves, it's forbidden to wear loosely clothes, women's hair need to be placed in the do the job cap.
3. The cutter shaft of woodworking machinery ought to be interlocked with the power appliance. Avoid accidental electric shock to generate the tool suddenly switch and cause injury whenever disassembling or replacing your tool.
4, in the destination where the wood possesses flying out or plummeting, wear a safety motorcycle helmet or wear protective clean shoes.
5, woodworking machinery should make an effort to improve, install automatic feeding apparatus and protective cover to prevent personal injury.
6. The location where the wood is in danger of rebound, a bulletproof device must be provided and its reliability should be checked frequently.
7. Before the new workers can work on the machine, they must first perform training. The operation must reach a specific level of proficiency. Together, it is necessary to understand that the possibility of various injuries as well as protection methods.
8, the slicer should be cleaned frequently to forestall workers from being smashed by wood or slipped by means of wood chips and shavings.
https://www.chinachangxing.com/Hot-Press-Machine-pl6520806.html