三河マルシェ【MARCHE】三河エリアのコミュニティポータルサイト

The SAE fuel line quick coupling is an ideal component for auto piping connections and may be widely used in car fuel systems. Technical characteristics Medium fuel, air, acrylic / oil gas working pressure of about 12 bar, working temperature engine area -40°C ~ +115°C, limited time to +150°C (about 30 minutes), to meet certain requirements of SAE J2044.



How to connect and disassemble the actual fuel line quick connector:

The fuel line quick connector contains a connector housing, a inner O-ring, an outer O-ring, an isolating ring, an outer ring, plus a self-locking buckle. When another pipe adapter (male connector) is inserted into the connector, the self-locking buckle It's got a certain elasticity, and the snap fastener enables you to connect the two connectors mutually, and then pull back in order that the installation is it is in place, so that the effective connector works. When difficult and disassembling, just push the male connector first and then press the snap switch on both ends of the self-locking buckle to create the self-locking buckle expand in the centre, the connector can possibly be easily pulled out, as well as SAE 30 heavy oil really should be used for lubrication in advance of reconnecting.



Safety:

The energy line quick connector adopts double seal ring radial plugging structure, and the intrinsic O-ring adopts modified rubber, which is mainly suitable for the physical and chemical properties on the fluid to prevent growing old, corrosion, swelling, etc.;the particular outer O-ring has a intermediate isolation ring. Divided, the two sealing happens to be have corresponding movable room, no rubber matrix bonding occurs, and the outer O-ring adopts synthetic rubber for boosting mechanical properties and reduce air aging. The sealing ring and also the isolating ring are firmly fixed inside the housing through the elastic bayonet device belonging to the outer retaining ring, as well as sealing ring is not peeled off and displaced. Great guarantee from the safety of the seal.



The design and production belonging to the fuel line quick connector is strictly prior to SAE J2044 (Fast connector Specification for Fuel and Steam/Volatilization Systems). If the existing product does certainly not meet the customer's wants, we will design and produce reported by the customer's requirements. The particular plug-and-pull self-locking structure would make connecting and disconnecting easier and simpler, and space required for operation is just the width of a single finger on each area. These features ensure which the connectors are densely loaded and add flexibility towards customer's design.



Working ecosystem of fuel line effective connector:

a, gasoline and diesel delivery systems.

b. Operating pressures around 500 kPa, 5 pub, (72 psig).

c. Operating vacuum is as little as -50 kPa, -0. FITYFIVE bar, (-7. 2 psig)

ve had. Operating temperature range -40°C (-40°F) that will 115°C (-239°F), short moment 150°C.



Used in that automotive industry:

The SAE quick coupler would work for tube-to-tube connections in addition to tube-to-device connections.

·Fuel piping

·Conveying as well as return line

·The supply tank drain line

·Exhaust series

·Oil cooling pipe.
https://www.stdrubberhose.com/Fuel-line-quick-connector-pl6627926.html